COMMUNICATIONS ELECTRONICS USASCAN.COM COMMUNICATIONS ELECTRONICS SHIPPING INFO
CLICK TO ORDER
CONTACT US
SPECIALS
PRODUCTS
BEARCAT SCANNERS
TWO WAY TRANSCEIVERS
SCANNER SOFTWARE
SHORTWAVE
CB RADIOS
ACCESSORIES
ICOM RADIOS
UNIDEN FRS/GMRS 2-WAY
BK RADIO
AOR RADIOS
WEATHER RADIO
RF ANALYZER
VOICE LOGGERS
WEATHER BUREAU
SERVICES
ORDERING INFO
CEI NEWS
CEI FAQS
OWNERS MANUALS
CUSTOMER BENEFITS
ANTITERRORISM OPS
WATER SAFETY
SEARCH AND RESCUE
PHOTOS
MAILING LIST
LINKS
FINANCIAL SERVICES
PRESS RELEASES
JOB OPPORTUNITIES
CONTACT US
CLICK TO ORDER
Uniden Bearcat
BCD996T - Featuring GPS support and DIN-E mounting. Order at Communications Electronics 1-800-USA-SCAN

BCD996T - APCO 25 Digital Ready Scanner Featuring up to 6,000 Dynamically Allocated Channels and up to 400 Systems - The BCD996T will automatically monitor both digital and analog transmissions. It is easier to program than the BCD996XT.
Now with 9,600 baud APCO digital control channel with digital voice. Also features C4FM and Compatible Quadrature Phase-Shift Keying (CQPSK) compatibility.

The BCD996T is sold out and discontinued. The replacement is the BCD996XT. Buy it now - Click here.

The BCD996T is our top-of-the-line radio scanner. Looking for a scanner that's lower cost, check out the Bearcat BCT15, BC898T, BCT8, BC370CRS, BC340CRS, BC350C or BC244CLT. Looking for a handheld scanner, check out the Bearcat BCD396T, BC246T, Sportcat 230, BC95XLT, or BC72XLT.

When you purchase your Bearcat BCD996T scanner from Communications Electronics, you also get access to free software updates from Uniden which helps protect your investment and gives you the latest scanner features. Click here for the Uniden BCD996T software download page. A full version software activation key will be sent to the email address you enter.

For maximum scanning pleasure, enjoyment and satisfaction, we recommend you also order Scancat Lite Plus software for your BCD996T to allow you to program your BCD996T using your personal computer. You save $20.00 in shipping when you order Scancat Lite Plus software and it is shipped at the same time with your BCD996T scanner. To order and save, use part number CATSCLP for only $29.95.

Continuous Band Coverage includes Aircraft, new 764-776 MHz & 800 MHz bands

Capable of scanning conventional frequencies, analog trunking systems, and the most popular digital trunking systems, the BCD996T scanner is a great all-in-one solution to your scanning needs.

Factory new in box - not refurbished or repaired

PDF Click here for free preliminary 152 page BCD996T Operations Guide (2.19 Mb). Specifications are subject to change.

Export to Canada is available. Due to Canadian Government regulations, a digital permit or exemption from Government Canada is required to use a BCD996T or BC796D digital radio scanner in Canada.
For more information on this please refer to the following PDF documents:
RSS-135, RSS-215 & IPC-2-1-04. For further assistance, telephone or e-mail your regional Industry Canada Spectrum Management and Telecommunications office.

40th anniversary special - Save $80.00 - Only $449.95. Price includes $40.00 UPS Ground shipping/handling/insurance per scanner to a street address in the continental USA excluding Alaska.

New - optional magnetic mount mobile antenna part number ANTMMBNC is available for $49.95.

For additional ordering & delivery information click here.

Canada delivery price is $449.95 plus $110 shipping, handling and insurance per scanner.
UK and Australia delivery, price is $449.95 plus $145.00 shipping, handling and insurance per scanner. Prices are in US currency. Client is responsible for all duties and taxes. International shipments are through Federal Express or United States Postal Service.

BCD996T
QUANTITY
PRICE EACH
[Includes Shipping]
1
$449.95
2
$449.45
3
$448.95
4
$448.45
5
$447.95
6-12
$447.45
13-18
$446.95
19-24
$446.45
25+
$445.95



Domestic warranty service available
United States
United States of America
Factory customer care 1-800-297-1023
Uniden customer care fax 1-800-323-2641

Manufactured in
China
China


Only the AC adapter is

UL

FREQUENTLY ASKED QUESTIONS:

How much does the BCD996T cost?
Communications Electronics price for USA clients is listed above. Quantity discounts apply. The more you buy, the more you save.

Is the digital card in the BCD996T scanner removable?
No. In fact, there is no digital card in the BCD996T. The digital decoder is built-in to the scanner.

Where do I find out more information on new Uniden Bearcat scanners?
Click here for Communications Electronics new scanner news.

What is the performance difference between Bearcat analog and digital ready scanners?
Performance on digital systems can vary due to signal quality, multipath interference, and cellular interference. Unlike analog trunking, where you can hear the audio with some interference mixed in, interference in a digital system completely blocks the signal. If you do not get good digital reception, we recommend the purchase of the optional ANTMMBNC magnetic mount antenna. Using this antenna, adjust your location and the position of the antenna until reception improves.


FEATURES: (New BCD996T features in red)

  • Digital Ready - APCO Project 25 Phase 1 Digital Ready. Now with 9,600 baud APCO digital control channel with digital voice. Also features C4FM and Compatible Quadrature Phase-Shift Keying (CQPSK) compatibility. Not compatible with AEGIS, ASTRO or ESAS systems. The BCD996T can monitor public safety organizations who currently use conventional, trunked at 3,600 and 9,600 baud analog control channel and digital voice and mixed mode APCO Project 25 systems.
  • Fire Tone Out Decoder - This feature lets you set the BCD996T to alert you if your selected two-tone sequential paging tones are received. Ideal for on-call firefighters, emergency response staff and for activating individual scanners used for incident management and population attack warning. To purchase a Fire Tone Out Encoder transceiver, useful for remotely activating fire pagers, tornado and enemy tactical attack siren warning systems, click here.
  • Free - Uniden Advanced Scanner Director software - When you purchase your Bearcat BCD996T scanner from Communications Electronics, you also get access to free software updates from Uniden which helps protect your investment and gives you the latest scanner features. Click here for the Uniden BCD996T software download page.
  • Close Call Radio Frequency Capture – Close Call exclusive technology locks onto nearby radio transmissions, even if you haven't programmed anything into your scanner. This is the easiest way ever to keep up with what is going on around you. Ideal for intelligence agencies for use at events where you don't have advance notice or knowledge of the radio communications systems and assets that you need to intercept and monitor.
  • Close Call Do-Not-Disturb - Checks for Close Call activity in between channel reception so active channels are not interrupted.
  • Close Call Temporary Store - Temporarily stores and scans the last 10 Close Call hits so that you can continue to monitor activity on those frequencies, even after you are out of Close Call detection range.
  • Six-line, 16-character, Alpha Display - You can customize your scanner by storing text tags for easy identification of banks, channel transmission, trunking talk group ID and more. Allows for alpha tagging display of channel, bank or search range. makes it easy for you to see who is talking by displaying the assigned text tag instead of just a frequency or talk group ID number.
  • Red/Green Backlit Full-Frequency Display - Shows the channels being scanned and the frequency entered into each channel with an easy-to-read backlit display for enhanced night visibility. Provides for good visibility day or night. You can adjust the back light so it turns on when you press a key, when the squelch breaks during a transmission, or manually.
  • Dynamically Allocated Channel Memory - The BCD996T scanner's memory is organized so that it more closely matches how radio systems actually work. Organize channels any way you want, using Uniden's exclusive dynamic memory management system. 3,000 channels are typical but over 6,000 channels are possible depending on the BCD996T scanner features used. You can also easily determine how much memory you have used and how much memory you have left.
  • Preprogrammed Systems - The BCD996T is preprogrammed with over 500 agencies covering police, fire and ambulance operations in the 25 most populated counties in the US, plus the most popular digital systems. A complete list of the scanner's preprogrammed systems is in the owners manual on page 140. Click to view the BCD996T owners manual.
  • 100 Quick Keys – You can set the BCD996T so you can quickly select systems and groups by using the keypad. This makes it easy to listen to or quickly lock out those systems or groups you don't want to scan.
  • “Soft” Search Keys - Lets you quickly search specified ranges.
  • Enemy Zeroize Memory - When your scanner is in danger of enemy capture, the BCD996T zeroize memory feature deletes all preprogrammed data by holding down the 2, 9 and hold keys while turning the scanner on. Erasing memory deprives the opposition of sensitive programmed frequency and talk group designator information which could be used for intelligence purposes. A useful feature for helping you win the global struggle against violent extremism.
  • Analog and Digital Audio AGC - Helps automatically balance the volume level between different radio systems.
  • Broadcast Screen - Sets the BCD996T so it ignores Close Call or search hits on known broadcast frequencies including pager frequencies.
  • Repeater Reverse - Automatically switches to the input frequency on a conventional repeater system.
  • Adaptive Digital Threshold - Automatically sets the digital decode threshold for APCO 25 systems.
  • Channel Alert - Alerts you when there is activity on any channel you specify using your choice of nine unique alert tones.
  • Custom Alerts – For each alert in the scanner (such as channel alert, Close Call alert, emergency alert) you can select from nine different tone patterns and also set the alert volume level independently from the main volume level.
  • Custom Screen - Lets you input up to 10 frequency ranges that the BCD996T will ignore during Close Call or search operation.
  • Preprogrammed Service Search (13) - Makes it easy to find interesting frequencies used by public safety, news media, Racing, TV broadcast audio, Amateur (ham) radio, CB radio, Family Radio Service/GMRS, FM Broadcast, special low power, railroad, aircraft, marine, racing and weather frequencies.
  • PC Programmable - Provides for both programming and remote control of the BCD996T from a PC. This feature allows the user to remotely program and control the scanner using third party software.
  • Included PC Programming Cable – makes programming your scanner much easier. Free full-featured software available for download after software activation. Call Uniden customer care at +1-800-297-1023 for product support on Uniden BCD996T scanner software.
  • Channel Lockout - You can lock out any system, group, frequency, or channel while scanning. If you lock out a system or group, any channels belonging to that system or group are also locked out. You can lock out up to 200 frequencies. The BCD996T skips locked-out frequencies while using the Close Call feature or while searching.
  • Frequency Lockout - You can lock out up to 500 frequencies (250 permanently locked out + 250 temporarily locked out). The scanner skips locked-out frequencies while using the Close Call™ feature or while searching.
  • Dynamically Allocated Channel Memory - The BCD996T scanner's memory is organized so that it more closely matches how radio systems actually work. Organize channels any way you want, using Uniden's exclusive dynamic memory management system. 3,000 channels are typical but over 6,000 channels are possible depending on the BCD996T scanner features used.
  • Memory Check - You can easily determine how much memory you have used and how much memory you have left. See at a glance how much total memory is left.
  • Multi-Site Trunking - Lets you share system channels across multiple sites to more efficiently use the scanner’s memory and more easily select sites to monitor.
  • Location Based Scanning - If you connect a GPS unit to the scanner it can automatically enable and disable systems based on the Location Information (longitude, latitude, Range) that you provide.
    GPS Non-Radio Based Features - The scanner alerts you to Dangerous Intersections, Speed Alerts, and Points of Interest that you program into the scanner.
    GPS Display Mode - Lets you display extended GPS information such as Distance to a POI, Direction to a POI, Time to a POI, Speed, Position, and more.
  • Preprogrammed Systems - The BCD996T is preprogrammed with over 400 channels covering police, fire and ambulance operations in the 25 most populated counties in the US, plus the most popular digital systems. A complete list of the scanner's preprogrammed systems is in the owners manual on page 140. Click to view the BCD996T owners manual.
  • Display Contrast - Select one of 15 display contrast levels for different viewing conditions.
  • Search with Scan Operation - Lets you include selected service searches or custom search ranges during normal scan operation.
  • Automatic Channel Step — Accepts frequencies on any valid channel step, even if it does not fall within the band plan’s default step.
  • Frequency Step — Lets you select a frequency step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz) for manual mode and search mode.
  • Temporary Lockout - Makes it easy to temporarily lock out a system, channel, or frequency. The lockout is cleared when you turn power off, then back on so you don’t have to remember to unlock the channels later.
  • Startup Configuration - Lets you easily manage multiple configurations for your scanner.
  • Single-Handed Function Control Operation - You can tap the Function/Scroll Control to enable the Function mode. It reverts to normal mode in about 3 seconds from your last press if no other action occurs.
  • Record Out Jack - Using the appropriate cable and audio recording device with signal control, you can record live audio of designated channels.
  • Display and Keypad Backlight - Makes the display and keypad easy to see in dim light using two color options and six light levels plus off.
  • Vehicle Power Connection (Orange Wire) - Lets you connect to your vehicle’s dimmer circuit to also dim the scanner’s display with the vehicle’s dimmer control.
  • Talk Group ID Auto Store - Automatically stores all new talk group ID’s into a channel group you select.
  • Alpha Tagging - Allows the user to assign an alpha description to each channel, trunking talk group and bank.
  • Attenuator - You can set the BCD996T's attenuator to reduce the input strength of strong signals by about 20 dB.
  • Automatic Digital Detect – Allows the scanner to switch to digital voice decoding when it detects valid APCO 25 data without any special programming.
  • Frequency Auto Store - The BCD996T can automatically stores all active frequencies into the selected conventional system.
  • Chain search mode - When the scanner finds an active frequency, the trunk tracking system will be active.
  • Channel Step Selection - You can set channel steps, 5 kHz to 100 kHz or Auto, in conventional mode or chain search mode. The default receive mode should be the proper mode setting in almost all cases. You may wish to set some VHF channels for NFM mode, depending on any adjacent channel interference problems. WFM is typically used for broadcast frequencies such as TV audio or FM radio.
  • Continuous Band Coverage (25 MHz TO 1.3 GHz) - Allows coverage from virtually every frequency from 25 MHz to 1.3 GHz excluding the cellular bands and UHF TV band, so you can tune into police, fire, weather, ambulance, aircraft, military, "Ham" radio and much more..
  • CTCSS/DCS - This feature allows the user to assign analog and digital subaudible tone codes to a specific frequency in memory. The scanner will also search for unknown CTCSS and DCS tones. Helps prevent interference from stations not using the mode you select.
  • Data Skip - Automatically skips frequencies that have a constant-level transmission such as used on data channels for some systems, paging systems, and internally generated birdies.
  • Direct Channel Access - Jump directly to any channel without stepping through other channels or entering menu mode.
  • Duplicate Frequency Alert - If you enter a frequency which has been stored in another channel, you will hear a beep and the channel stored displays a duplicate warning message.
  • FIPS Code - This feature allows you to input a six-digit code Federal Information Processing System (FIPS) code that will designate a localized severe weather warning and county all hazards warning. The BCD996T can decode the 6-digit FIPS code established by the National Weather Service (NWS). This FIPS code identifies geographic areas anywhere in the United States, US territories and US possessions. Programming the FIPS code is necessary to receive S.A.M.E. alerts about weather occurring in a particular area. To obtain a FIPS code for your area, call the National Weather Service toll free at 1-888-697-7263 or visit http://www.nws.noaa.gov/nwr/indexnw.htm#sametable.
  • Key Beep Option - Allows you to turn the key beep on or off..
  • Manual Channel Access - Go directly to any channels without stepping through other channels.
  • Memory Backup - If power is disconnected, the frequencies programmed in your scanner are retained in memory.
  • Menu-Driven Design - This function allows advanced programming and control operation through the easy-to-use menu system.
  • Multi-System Tracking – Scans conventional and trunking systems at the same time.
  • National Weather Radio - Can be programmed to receive special localized weather warnings broadcast by NOAA. The scanner is compatible with warning siren and message transmissions.
  • One Touch Weather - Automatically scans all national weather channels with a single touch.
  • Priority Channels - Designate any channel as a priority channel. Assigning a priority channel allows you to keep track of activity on your most important channel(s) while monitoring other channels for transmissions. When Priority Scan is turned on, your scanner checks the priority channel in the banks you selected every 2 seconds for activity. If a signal is present on the priority channel, your scanner monitors the channel until the transmission ends, then resumes normal scanning.
  • Priority Plus Scanning – Set the BCD996T so it scans only the priority channels.
  • Programmable Search - Allows you to find new frequencies in any of the bands.
  • Receiving Mode Selection - You can set the receiving mode, AM or FM in conventional mode or chain search mode.
  • Reverse Mode - This key will allow you to observe the reverse frequency of the repeater. While pressing "RVRS", the standard repeater pair frequency will be displayed.
  • RF Attenuator - The BCD996T comes with an RF Attenuation feature. If you are near an unusually strong signal source, the signal may overload the scanner. The RF Attenuation features works in all modes and attenuates (reduces) the incoming signal strength to prevent stronger signals from overloading the scanner.
  • Specific Area Message Encoding (S.A.M.E.) weather alert - S.A.M.E. is NOAA’s coded emergency weather signals that identify a specific geographic area affected by an emergency. In weather alert with S.A.M.E. mode, your scanner functions as a county specific all hazards warning radio. To obtain further information about S.A.M.E. and FIPS code, visit http://www.nws.noaa.gov/nwr/index.html.
  • Text Tagging - You can name each system, group, channel, talk group ID, custom search range, and SAME group, using up to 16 characters per name.
  • TrunkTracker IV - Follows unencrypted conversations on analog Motorola, Motorola Astro 25 (APCO 25), EDACS, EDACS SCAT, and LTR trunked radio systems, including systems in VHF, UHF, 700 MHz, 800 MHz, and 900 MHz bands. The BCD996T can scan both conventional and trunked systems at the same time.
  • Turbo Search - Searches for activity on frequencies at up to 300 steps per second (in the 5 kHz step ranges).
  • Turbo Scan - This lightning fast technology allows you to scan and search nearly 100 channels or steps per second.
  • Control Channel Only Mode - If the BCD996T is set to scan Motorola trunking frequencies, you can set it so it scans using only control channel data. You do not have to program voice channel frequencies into memory in this mode as long as all possible control channels are programmed.
  • Scanner Clone Mode - Allows for cloning of another scanner's programmed frequencies.
  • VFO Control - Allows the user to tune through frequencies, channels, alpha characters and more with the handy VFO tuning knob.
  • Scan/Search Delay - You can set the BCD996T so it remains on a frequency after the last transmission to wait for a possible reply. You can set the delay time for each system you scan, and while searching and using the Close Call™ feature.
  • Total Channel Control - Allows the user to program delay, step, mode (adjustable) priority, attenuation and more on a per-channel basis.
  • Trunk Search - Search for and monitor all the groups within a trunked system. Lockout unwanted groups during the search and save other groups to scan lists.
  • Trunk Lockout - Lockout groups you don't wish to monitor, (including data groups) from the trunked system.
  • Trunk Delay - Apply a five second delay to trunking groups so that both sides of a conversation can be heard, even if the trunking frequencies change between replies.

CHANNELS

Up to 6,000 Channels (100 channels x 10 Banks)

BANDS
27 Bands

PREPROGRAMMED SERVICES

Service Search menus are preprogrammed services used across the United States. Select services from the following: Weather, Public Safety, News, TV broadcast, Amateur (ham) radio, Marine, Railroad, Aircraft, CB radio, Family Radio Service.

SOME OF THE RADIO SERVICES WHICH MAY BE MONITORED
  • Motorola Type I, II, IIi Hybrid, and APCO Project 25 Phase 1 Digital Systems (including 3600 bps and 9600 bps control channel systems) EDACS and EDACS SCAT trunking systems used by police, fire, ambulance, and other local and state public safety agencies as well as utilities and other businesses. Features C4FM and CQPSK compatibility.
  • LTR trunking systems used by local businesses and a few public safety agencies.
  • Conventional Digital APCO 25 frequencies
  • CB, GMRS, FRS, Marine, and other 2-way radios used by families, truckers, and community groups
  • Business Band frequencies used nationwide
  • Amateur Radio frequencies used by licensed radio operators to report emergency weather conditions, experiment with new communications methods, or just to chat.
  • Local and national government agencies
  • Civil and military aircraft
  • FM and TV Broadcast channels
  • NOAA Weather Radio
  • And much, much more!

FREQUENCY RANGE

25.0000 - 26.9600 MHz (Petroleum Products & Broadcast Pickup)
26.9650 - 27.4050 MHz (CB Radio)
27.4100 - 27.9950 MHz (Business & Forest Products)
28.0000 - 29.6900 MHz (10 Meter Amateur Band)
29.7000 - 49.9900 MHz (VHF Low Band)
50.0000 - 53.9900 MHz (6 Meter Amateur Band)
54.0000 - 71.9500 MHz (VHF TV)
72.0000 - 75.9950 MHz (Intersystem & Astronomy)
76.0000 - 87.9500 MHz (VHF TV)
88.0000 - 107.9000 MHz (FM Broadcast)
108.0000 - 136.9750 MHz (Aircraft Band)
 137.0000 - 143.9875 MHz (Military Land Mobile)
144.0000 - 147.9950 MHz (2 Meter Amateur Band)
148.000 - 150.7875 (Military Land Mobile)

150.7875 -173.9875 MHz (VHF High Band)
174.0000 - 215.9500 MHz (VHF TV)
216.0000 - 224.9950 MHz (1.25 Meter Amateur)
225.0000 - 399.9500 MHz (UHF Aircraft Band)
400.0000 - 405.9875 MHz (UHF Aircraft Band)
406.0000 - 419.9875 MHz (Federal Government Land Mobile)
420.0000 - 449.9875 MHz (70 cm Amateur Band)
450.0000 - 469.9875 MHz (UHF Standard Band)
470.0000 - 512.0000 MHz (Public Service & TV Band)
764.0000 - 775.9875 (Public Service Band)
794.0000 - 805.9875 (Public Service Band)
806.0000 - 823.9875 MHz (Public Service Band)
849.0125 - 868.9875 MHz (Public Service Band)
894.0125 - 956.0000 MHz (Public Service Band)
1240.0000 - 1300.0000 MHz (25 cm Amateur Band)

Frequency ranges, the default mode (AM, FM, or Wide band FM), and the default frequency step for each range:
FREQUENCY RANGE
MODE
(MHz)
STEP
(kHz)
25.0000 - 27.9950
AM
5
28.0000 - 29.6800
NFM
20
29.7000 - 49.9900
NFM
10
50.0000 - 53.9900
NFM
20
54.0000 - 71.9500
WFM
50
72.0000 - 75.9950
FM
5
76.0000 - 87.9500
WFM
50
88.0000 - 107.9000
WFM
100
108.0000 - 136.9750
AM
25
137.0000 - 143.9875
NFM
12.5
144.0000 - 147.9950
NFM
5
148.0000 - 150.7875
NFM
12.5
150.8000 - 161.9950
NFM
5
162.0000 - 173.9875
FM
12.5
174.0000 - 215.9500
WFM
50
216.0000 - 224.9800
FM
20
225.0000 - 399.9500
AM
50
400.0000 - 512.0000
NFM
12.5
764.0000 - 775.9875
NFM
12.5
794.0000 - 805.9875
NFM
12.5
806.0000 - 823.9875
NFM
12.5
849.0125 - 868.9875
NFM
12.5
894.0125 - 956.0000
NFM
12.5
1240.0000 - 1300.0000
NFM
25

MODES

AM/FM/WFM (adjustable per channel)

STEP SIZES (kHz)

5, 7.5, 10, 12.5, 25, 50, 100

WEATHER FREQUENCY

162.4000 - 165.5500 MHz (25 kHz Step)

DISPLAY

Full LCD (with back light)
(BANK, LIST, SCAN, SEARCH, HOLD, PRI, DLY, L/O, LINE, FREQ, CHAN, ALPHA, RMT, AUTO, ATT, ALT)

CONTROLS/SWITCHES

Volume/Squelch Control with power ON/OFF switch

POWER REQUIREMENTS

DC 11.0 Volt to 16.6 Volt AC Adapter (AD-1009) or Vehicle Lighter Cord or DC Cord with Orange Wire

EXTERNAL JACKS

Antenna Jack: BNC Type
Phone Jack: 3.5 mm
External Speaker Jack: 3.5 mm
Record Out Jack: 3.5 mm

DC Power Jack: 5.5 mm EIAJ Type 2 center pin positive
Remote Interface Jack: 4 pin mini
GPS/Remote Interface Jack - D-sub 9 pin Male Type
External DC Power/Orange Wire Jack - 3 pin (Center Orange Wire)

INTERNAL SPEAKER

2.6 Watt nominal into 8 ohm internal speaker

SCAN RATE

Up to 100 channels per second (conventional mode)

SCAN DELAY

none, 1, 2, 4, infinite (stay on until Resume is pressed)

AUDIO OUTPUT

30 milliwatt nominal into 32 ohm earphone,
6 milliwatt nominal into 64 ohm earphone.

ANTENNA

50 ohm impedance

OPERATING TEMPERATURE

-4° F - 140° F
-20° C - 60° C

CLOSE CALL OPERATING TEMPERATURE

-14° F - 140° F
-10° C - 60° C

SIZE

7.2” Wide x 5.9” Deep x 2.2” High
183 mm Wide x 150 mm Deep x 56 mm High

WEIGHT

3.46 pounds (1.57 Kg) without mounting bracket

UPC CODE

0-45747-68888-1

MASTER CARTON QUANTITY

6

INCLUDED ACCESSORIES

AC Adapter, Vehicle Lighter Adapter Power Cord, Three Wire DC Power Cord, Mounting Bracket and Hardware, DIN-E Sleeve and Removal keys for vehicle installation, Push-on type telescopic antenna, Remote PC to Scanner Cable (scanner plug to Front PC Connecter, OMBCD996T Owner's Manual

OPTIONAL ACCESSORIES

PART

DESCRIPTION

PRICE

ANTMMBNC Magnetic Mount Antenna with BNC Connector & 12 Feet Cable $29.95
AT002 Window Mount/Suction Cup Antenna with BNC Connector & 10 Feet Cable $15.95

CATSCLP

Scancat Lite Plus Scanner programming software - For the BCD996T, scheduled for September 1, 2006

$29.95


OPTIONAL ACCESSORIES FOR BEARCAT SCANNERS

PART

DESCRIPTION

PRICE

AD1001

AC Adapter 120VAC to 6VDC @ 800 mA - 10 watts

$24.95

ANTMMBNC

Magnetic Mount Antenna with BNC Connector & 12 Feet Cable

$29.95
AT002 Window Mount/Suction Cup Antenna with BNC Connector & 10 Feet Cable $15.95

AT094

Replacement Heavy duty flexible rubber scanner antenna

$14.95

AT218 Replacement flexible rubber scanner antenna $14.95
BP250 Nickel Metal Hydride 1,500 mAh High Capacity Battery Pack $24.95

CLIP250D

Belt Clip

$24.95

COV396T Back battery cover $24.95

CRX120

Spare battery charging cradle for BP120, BP180 or BP250

$19.95

ESCAN

E-Scanner Software

free from Uniden

HF24RS

Scanner Headset

$29.95

LC396T Deluxe Leather Carrying Case with Swivel Belt Loop $49.95
OMBCD996T Owners Manual for BCD996T scanner $14.95

RC250D

Remote computer interface cable

$34.95

TTFREQ Trunking Frequency Guide Book $9.95

 

Cigarette Lighter DC Cord for BCD996T

TBD

Click here for information on understanding scanning.

You must be 100% satisfied with your Bearcat scanner when you order from CEI. All Bearcat scanners purchased directly from CEI are sold for your evaluation and testing for 61 days before you decide to keep it (excluding CEI E-values).

The installation, possession, or use of any radio receiver in a motor vehicle may be prohibited, regulated, or require a permit in certain states, cities and/or local jurisdiction. Your local law enforcement officers should be able to provide this information regarding the laws in your community. Click here for more information on scanning legally.

Features, specifications, availability of optional accessories or database services are all subject to change without notice.

Performance on digital systems can vary due to signal quality, multipath interference, and cellular interference. Unlike analog trunking, where you can hear the audio with some interference mixed in, interference in a digital system completely blocks the signal. If you do not get good digital reception, we recommend the purchase of the optional ANTMMBNC magnetic mount antenna. Using this antenna, adjust your location and the position of the antenna until reception improves.


Google
Search www.usascan.com Search www.wxbureau.com

Communications Electronics Inc.

For fastest order entry and maximum savings Click here to Order online

WWW.USASCAN.COM
PO Box 1045, Ann Arbor, Michigan 48106-1045 USA
Copyright © 1996 - 2006 Communications Electronics Inc. All rights reserved

Optimized for Internet Explorer 6.X / Designed by Balynce


USASCAN.COM COMMUNICATIONS ELECTRONICS